How to play?

To play a LED display is easy. There are two ways to control LED display.

A.Synchronous Control

Key components: PC/laptop, sending card/box, receiving card, net cable, software

Diagram:

Connection steps:

1.Open PC/laptop. Connect sending box to PC/laptop via data cable(net cable), connect power cable to power source;

2.There is a receiving card inside each LED cabinet, all cables connected already. Connect power cable and data cable between every 2 LED cabinets. Leave the thicker main power cable and main data cable to outside;

3.Connect the main data cable to sending box, the main power cable to power source, turn on the main power.

4.For software settings, please find manual in Resources

B.Asynchronous Control

Key components: PC/laptop, asynchronous sending card(1pcs, inside 1st LED cabinet marked), receiving card, U Disk, software

Diagram:

Connection steps:

1.Open PC/laptop. Connect PC/laptop to asynchronous sending card via data cable(net cable), power cable to power source;

2.There is a receiving card inside each LED cabinet, all cables connected already. Connect power cable and data cable between every 2 LED cabinets. Leave the thicker main power cable and main data cable

3.Connect the main power cable to power source, turn on the main power.

4.Upload prepared video source from PC/laptop to asynchronous card and confirm “Save”. After setting disconnect PC/laptop with LED display.

5.For software settings, pls find manual in Resources

If any question about software, chat with our online account manager now.